All Products

4WMM25 solenoid valve direction control

WMM25, 32 diameter manual reversing valve Diameter (NG) 25, 32mm, pressure to 31.5MPa, flow rate to 1100L/min The WMM type valve is a handle-operated directional slide valve, which is used to control the opening, stopping and reversing of the liquid...

2FRM6 Two way flow control valve

2FRM type flow control valve is a two-way flow control valve (speed regulating valve), which is used to control the flow rate so that it is basically constant and not affected by pressure and temperature. Jinhai is professional manufacturer of...

DRVP25 one-way throttle valve

DV(P)/DRV(P)...10 throttle valve/one-way throttle valve DV, DVP type throttle valve and DRV, DRVP type one-way throttle valve are a kind of flow control valve that can adjust the speed of the actuator relatively simply and accurately, and it is also...

DVP16 Hydraulic throttle valve

DV(P)/DRV(P)...10 throttle valve/one-way throttle valve DV, DVP type throttle valve and DRV, DRVP type one-way throttle valve are a kind of flow control valve that can adjust the speed of the actuator relatively simply and accurately, and it is also...

Z2FS10 Dual one-way throttle valve

ZSFS superimposed double one-way throttle valve Size (NG)6-22 pressure to 35MPa flow to 360L/min Z2FS superimposed dual one-way throttle valve adjusts the flow of the oil circuit by changing the size of the throttle section to achieve flow control....

DBDS20K direct-acting overflow valve

DBD valve is a direct-acting relief valve, used to limit the system pressure, a total of 7 pressure levels: 2.5, 5, 10, 20, 31.5, 40 and 63MPa. Pressure adjustment types are: adjusting hand Shank, adjusting handle with lock and adjusting bolt with...

DBDS6K superimposed overflow valve

ZDB/Z2DB6 type 4X series superimposed overflow valve Superimposed structure Mounting surface according to DIN 24340, Form A 4 pressure levels 5 optional effective flow directions With 1 or 2 plug-in relief valves 4 adjustment forms: Adjustment...

ZDR10DA stacked pressure reducing valve

ZDR10D type pressure reducing valve is a stacked pressure reducing valve. It is designed as a three-way valve. It has secondary oil circuit pressure protection. It is used for pressure reduction of hydraulic systems. Stacked plate design Can be...

S20A Directional control check valve

The function of the S20A check valve is to only allow oil to flow freely from one direction, but not to allow reverse flow. The S20A check valve is a chain structure with small pressure loss. There are five opening pressures and three connection...

DR5DP three-way direct-acting pressure reducing valve

The DR5DP valve is a three-way direct-acting pressure reducing valve, which has an overflow function on the pressure reducing side to ensure the stability of the secondary pressure. It is used for circuit decompression. Direct acting structure...

Z1S10P Series hydraulic check-valve

Z1S type check valve is a check valve with superimposed structure. This type of valve mainly includes a valve body ① and a check valve insert ②. A check valve seals leak-free in one direction, while allowing free flow in the other direction. The...

4WEH32D directional control solenoid valve

WEH Electro-hydraulic Directional Valve Diameter (NG) 10-32mm, pressure to 28/35MPa flow to 1100L/min WEH type electro-hydraulic directional valve is a directional valve controlled by a solenoid valve. It adopts a plate connection, and its...

4WEH32E solenoid valve directional control

WEH Electro-hydraulic Directional Valve Diameter (NG) 10-32mm, pressure to 28/35MPa flow to 1100L/min WEH type electro-hydraulic directional valve is a directional valve controlled by a solenoid valve. It adopts a plate connection, and its...

MRV-02P stacked check valve

MRV-02 is a stacked check valve characteristic 1. Maximum rated working pressure: 210Kgf/cm² 2. Maximum flow rate: 40 I/min 3. Oil used: ISO VG32, 46, 68; 4. Viscosity range: 10~400cSt: 5. Operating temperature: -15~70℃ 6. Pollution standard: ≤NAS12...

MBRV-02P stacked pressure reducing valve

MBRV-02 is stacked pressure reducing valve characteristic 1. Maximum rated working pressure: 210Kgf/cm² 2. Maximum flow rate: 40 I/min 3. Oil used: ISO VG32, 46, 68; 4. Viscosity range: 10~400cSt: 5. Operating temperature: -15~70℃ 6. Pollution...

DG-02 direct-acting relief valve

DG-02 is a direct-acting relief valve characteristic 1. Direct-acting relief valve is used for small flow, maximum pressure regulation or as a safety valve 2. The remote control type is connected to the remote control port of BG(T), BHG(T), and SBG...

MPCV-03 superimposed hydraulic control check valve

MPCV-03 is a superimposed hydraulic control check valve characteristic: 1. Maximum rated working pressure: 210Kgf/cm² 2. Maximum flow rate: 80 I/min 3. Oil used: ISO VG32, 46, 68 4. Viscosity range: 10~400cSt 5. Operating temperature: -15~70℃ 6....

MRV-03B stacked check valve

MRV-03 is a stacked check valve characteristic 1. Maximum rated working pressure: 210Kgf/cm² 2. Maximum flow rate: 80 I/min 3. Oil used: ISO VG32, 46, 68; 4. Viscosity range: 10~400cSt: 5. Operating temperature: -15~70℃ 6. Pollution standard: ≤NAS12...

MPCV-02W superimposed hydraulic control check valve

MPCV-02 is a superimposed hydraulic control check valve characteristic: 1. Maximum rated working pressure: 210Kgf/cm² 2. Maximum flow rate: 40 I/min 3. Oil used: ISO VG32, 46, 68 4. Viscosity range: 10~400cSt 5. Operating temperature: -15~70℃ 6....

MCV-03W stacked check valve

MCV-03 is a stacked check valve 1. Maximum rated working pressure: 210Kgf/cm² 2. Maximum flow rate: 80 I/min 3. Oil used: ISO VG32, 46, 68 4. Viscosity range: 10~400cSt 5. Operating temperature: -15~70℃ 6. Pollution standard: ≤NAS12 level: 25um; 7....

WD-G03-B11B electromagnetic reversing valve

WD-G03 is an electromagnetic reversing valve characteristic 1.IS0 standard and installation dimensions are absolutely interchangeable. 2. Wet electromagnetic design, smooth operation without impact, low noise value. 3. 50Hz and 60Hz adopt common...

WD-G03-3C11 electromagnetic reversing valve

WD-G03 is an electromagnetic reversing valve characteristic 1.IS0 standard and installation dimensions are absolutely interchangeable. 2. Wet electromagnetic design, smooth operation without impact, low noise value. 3. 50Hz and 60Hz adopt common...

DSHG06 electro-hydraulic directional valve

DSHG06 is an electro-hydraulic directional valve characteristic 1. The installation surface conforms to ISO4401, CETOP, DIN24340, NFPA specifications, and has strong interoperability. 2. The direction of the spool of the valve is controlled by the...

DSHG04 electro-hydraulic directional valve Middle seat

DSHG04 is an electro-hydraulic directional valve characteristic 1. The installation surface conforms to ISO4401, CETOP, DIN24340, NFPA specifications, and has strong interoperability. 2. The direction of the spool of the valve is controlled by the...