All Products

DBDS6P Hydraulic Rexroth Relief Valves

DBD valve is a direct-acting relief valve, used to limit the system pressure, a total of 7 pressure levels: 2.5, 5, 10, 20, 31.5, 40 and 63MPa. Pressure adjustment types are: adjusting hand Shank, adjusting handle with lock and adjusting bolt with...

DZ10-1-30 Hydraulic Pilot Sequence Valve

DZ type pilot sequence valve Orifice (NG) 10.25.32 pressure to 21MPa flow to 450L/min This valve can be used as sequence valve, back pressure valve and unloading valve. Connection dimensions comply with DIN24340. Plug in or connect. Optionally with...

DVP10 Hydraylic Throttle Valve For Sale

DV(P)/DRV(P)...10 throttle valve/one-way throttle valve DV, DVP type throttle valve and DRV, DRVP type one-way throttle valve are a kind of flow control valve that can adjust the speed of the actuator relatively simply and accurately, and it is also...

RVP10 Series Hydraulic Check Valve for Sale

RVP Series Check valve, Non-return Valve, One-way valve; The function of the RVP check valve is to only allow oil to flow freely from one direction, but not to reverse flow. The stroke of the spool is limited by the spring seat, and the inner spring...

DBEM20 Hydraulic Pilot Operated Relief Valve

DBE type valve is a pilot relief valve with seat valve structure. The valve allows the system pressure to vary continuously with electrical input signals. It mainly includes a pilot valve (1) with a proportional solenoid (2) and a main valve (3)...

MRV-03A Stacked Check Pressure Control Valve

The MRV-03A Stacked Check Pressure Control Valve is used for pressure regulation. The pressure set by the relief valve is the highest pressure of the subsequent circuit. The second one is used for pressure limiting. In fact, it is similar to the...

DRV16 Hydraulic Throttle Check Valve

DV(P)/DRV(P)...10 throttle valve/one-way throttle valve DV, DVP type throttle valve and DRV, DRVP type one-way throttle valve are a kind of flow control valve that can adjust the speed of the actuator relatively simply and accurately, and it is also...

S6A Series check valve

The function of the S-type check valve is to only allow oil to flow freely from one direction, but not to allow reverse flow. The S-type check valve is a chain structure with small pressure loss. There are five opening pressures and three connection...

Z1S6P series hydraulic check-valve

Z1S type check valve is a check valve with superimposed structure. This type of valve mainly includes a valve body ① and a check valve insert ②. A check valve seals leak-free in one direction, while allowing free flow in the other direction. The...

Z2FS16 Double one-way throttle valve

ZSFS superimposed double one-way throttle valve Size (NG)6-22 pressure to 35MPa flow to 360L/min Z2FS superimposed dual one-way throttle valve adjusts the flow of the oil circuit by changing the size of the throttle section to achieve flow control....

DVP6 One Way Hydraulic Throttle Stop Valve

DV(P)/DRV(P)...10 throttle valve/one-way throttle valve DV, DVP type throttle valve and DRV, DRVP type one-way throttle valve are a kind of flow control valve that can adjust the speed of the actuator relatively simply and accurately, and it is also...

DB10 Hydraulic Pilot Relief Valve

Structure and working principle The DB type valve is a pilot-controlled relief valve, which is used to control the pressure of the hydraulic system. DB10 Hydraulic Pilot Relief Valve is mainly composed of pilot valve and main valve. DB type relief...

DV10 Hydraulic Flow Control Needle Valve

DV(P)/DRV(P)...10 throttle valve/one-way throttle valve DV, DVP type throttle valve and DRV, DRVP type one-way throttle valve are a kind of flow control valve that can adjust the speed of the actuator relatively simply and accurately, and it is also...

DB30 Pilot Operated Pressure Relief Valves

DB/DBW type 5X series pilot relief valve Orifice (NG) 10-32 pressure to 35MPa flow to 650L/min for chassis mounting Mounting surface according to DIN24340 E type, ISO 6264 and CETOP-RP 121 H, for threaded connections, For oil block installation 4...

S10P Hydraulic check valve

The function of the S10P check valve is to only allow oil to flow freely from one direction, but not to allow reverse flow. The S10P check valve is a chain structure with small pressure loss. There are five opening pressures and three connection...

S30P Hydraulic check valve

The function of the S30P check valve is to only allow oil to flow freely from one direction, but not to allow reverse flow. The S30P check valve is a chain structure with small pressure loss. There are five opening pressures and three connection...

SV.SL30P hydraulic control check valve

SV and SL hydraulically operated check valves allow hydraulic opening to allow reverse flow. This type of valve is used to isolate the part of the pressurized hydraulic circuit, that is, to prevent the load from falling when the pipeline fails and...

Z1S10D series hydraulic check-valve

Z1S type check valve is a check valve with superimposed structure. This type of valve mainly includes a valve body ① and a check valve insert ②. A check valve seals leak-free in one direction, while allowing free flow in the other direction. The...

Z2S22 Superimposed hydraulic control check valve

Size (NG) 6-22 pressure to 31.5MPa flow to 360L/min - Connection dimensions according to DIN 24340 - One or two working oil ports can be sealed without leakage, optional -suitable for vertical stacking Jinhai is professional manufacturer of Various...

DAW10B Pilot operated unloading valve

DA/DAW type 5X series pilot unloading valve Orifice (NG) 10-32 pressure to 21MPa flow to 450L/min - For manifold block installation - 4 control elements knob Adjusting screw with guard Locking knob with scale with scale knob - 4 pressure ranges -...

DBTG pilot relief valve

DB/DBW type 5X series pilot relief valve Orifice (NG) 10-32 pressure to 35MPa flow to 650L/min for chassis mounting Mounting surface according to DIN24340 E type, ISO 6264 and CETOP-RP 121 H, for threaded connections, For oil block installation 4...

DZ20-1-30 pilot sequence valve

DZ type pilot sequence valve Orifice (NG) 10.25.32 pressure to 21MPa flow to 450L/min This valve can be used as sequence valve, back pressure valve and unloading valve. Connection dimensions comply with DIN24340. Plug in or connect. Optionally with...

ZDR6DP superimposed direct-acting pressure reducing valve

ZDR6D superimposed direct-acting pressure reducing valve is designed for superimposed plates, with three-way features, for example, to control the pressure in the secondary oil circuit, it is used for decompression of the hydraulic system. Jinhai is...

DZC pilot sequence valve for Sale

DZ type pilot sequence valve Orifice (NG) 10.25.32 pressure to 21MPa flow to 450L/min This valve can be used as sequence valve, back pressure valve and unloading valve. Connection dimensions comply with DIN24340. Plug in or connect. Optionally with...