All Products

MK30G One way throttle valve

MK one-way throttle valve from diameter 6 to diameter 30 a total of 7 specifications. When the pressure oil flows from the back of the taper valve, it is used as a throttle valve, if it flows from the opposite direction, it is used as a check valve,...

MK10G One way throttle valve

MK one-way throttle valve from diameter 6 to diameter 30 a total of 7 specifications. When the pressure oil flows from the back of the taper valve, it is used as a throttle valve, if it flows from the opposite direction, it is used as a check valve,...

MK15G One way throttle valve

MK one-way throttle valve from diameter 6 to diameter 30 a total of 7 specifications. When the pressure oil flows from the back of the taper valve, it is used as a throttle valve, if it flows from the opposite direction, it is used as a check valve,...

MK25G One way throttle valve

MK one-way throttle valve from diameter 6 to diameter 30 a total of 7 specifications. When the pressure oil flows from the back of the taper valve, it is used as a throttle valve, if it flows from the opposite direction, it is used as a check valve,...

MK20G One-way throttle valve

MK one-way throttle valve from diameter 6 to diameter 30 a total of 7 specifications. When the pressure oil flows from the back of the taper valve, it is used as a throttle valve, if it flows from the opposite direction, it is used as a check valve,...

HED40A Pressure relay pressure switch

HED4 pressure switch Pressure up to 35MPa Base mounting Pipe installing as a vertical stack in horizontally assembled valves The HED4 hydraulic-electric pressure relay is a plunger pressure relay. Its composition includes: a housing (1), an insert...

HED 80A series high pressure relay

HED pressure switch Pressure up to 35MPa Base mounting Pipe installing as a vertical stack in horizontally assembled valves The HED hydraulic-electric pressure relay is a plunger pressure relay. Its composition includes: a housing (1), an insert...

HED 80P hot sale pressure switch

HED pressure switch Pressure up to 35MPa Base mounting Pipe installing as a vertical stack in horizontally assembled valves The HED hydraulic-electric pressure relay is a plunger pressure relay. Its composition includes: a housing (1), an insert...

HED4 series high quality Pressure reply

HED4 pressure switch Pressure up to 35MPa Base mounting Pipe installing as a vertical stack in horizontally assembled valves The HED4 hydraulic-electric pressure relay is a plunger pressure relay. Its composition includes: a housing (1), an insert...

HED1 Hydraulic solenoid valve accessories

Used in the system, when a section of the oil circuit reaches the set pressure, the pressure relay will send out an electrical signal to control some electrical components in order to achieve sequential action or safety protection. Jinhai is...

HED1 Hydraulic Solenoid valve parts

Used in the system, when a section of the oil circuit reaches the set pressure, the pressure relay will send out an electrical signal to control some electrical components in order to achieve sequential action or safety protection. Jinhai is...

HED1 Spare parts of hydraulic solenoid valves

Used in the system, when a section of the oil circuit reaches the set pressure, the pressure relay will send out an electrical signal to control some electrical components in order to achieve sequential action or safety protection. Jinhai is...

JCS-02 Hydraulic pressure switch solenoid valve accessories

The pressure switch is a component in the hydraulic system that makes the electric contact act when the fluid pressure reaches a predetermined value. The pressure relay can also be defined as a hydraulic component that converts pressure into an...

MRV-03P stacked check valve

MRV-03 is a stacked check valve characteristic 1. Maximum rated working pressure: 210Kgf/cm² 2. Maximum flow rate: 80 I/min 3. Oil used: ISO VG32, 46, 68; 4. Viscosity range: 10~400cSt: 5. Operating temperature: -15~70℃ 6. Pollution standard: ≤NAS12...

MBRV-03P stacked pressure reducing valve

MBRV-03 is stacked pressure reducing valve characteristic 1. Maximum rated working pressure: 210Kgf/cm² 2. Maximum flow rate: 80 I/min 3. Oil used: ISO VG32, 46, 68; 4. Viscosity range: 10~400cSt: 5. Operating temperature: -15~70℃ 6. Pollution...

MBRV-03A stacked pressure reducing valve

MBRV-03 is stacked pressure reducing valve characteristic 1. Maximum rated working pressure: 210Kgf/cm² 2. Maximum flow rate: 80 I/min 3. Oil used: ISO VG32, 46, 68; 4. Viscosity range: 10~400cSt: 5. Operating temperature: -15~70℃ 6. Pollution...

DR10 pilot-operated pressure reducing valve

DR type 5X series pilot pressure reducing valve Rifice (NG) 10-32 pressure to 35MPa flow to 400L/min For bottom plate installation The installation surface is according to DIN24340 D type ISO5781 and CETOP-RP 121H, for threaded connections For oil...

DR20 pilot-operated pressure reducing valve

DR type 5X series pilot pressure reducing valve Rifice (NG) 10-32 pressure to 35MPa flow to 400L/min For bottom plate installation The installation surface is according to DIN24340 D type ISO5781 and CETOP-RP 121H, for threaded connections For oil...

DBEM10 pilot relief valve

DBE type valve is a pilot relief valve with seat valve structure. The valve allows the system pressure to vary continuously with electrical input signals. It mainly includes a pilot valve (1) with a proportional solenoid (2) and a main valve (3)...

DA20 Pilot operated unloading valve

DA/DAW type 5X series pilot unloading valve Orifice (NG) 10-32 pressure to 21MPa flow to 450L/min - For manifold block installation - 4 control elements knob Adjusting screw with guard Locking knob with scale with scale knob - 4 pressure ranges -...

MHB-03B stacked balance valve

MH-03 is a stacked balance valve Jinhai is professional manufacturer of Various types of Directional Control Valves, Flow Control Valves, Pressure Control Valves and Accessories, Should you have any questions please feel free to come back to us.

DSG03-3C2 magnetic exchange valve

The main feature of DSG-02 type electromagnetic reversing valve is that the thread of the magnetic sleeve and the thread on the body are directly screwed together, and the thrust generated when the electromagnet is energized and attracted directly...

DSHG04 electro-hydraulic directional valve

DSHG04 is an electro-hydraulic directional valve characteristic 1. The installation surface conforms to ISO4401, CETOP, DIN24340, NFPA specifications, and has strong interoperability. 2. The direction of the spool of the valve is controlled by the...

4WMM6 manual directional control valve

WMM type manual reversing valve Orifice (NG) 6, 10, 16 Pressure up to 35MPa Flow rate up to 300L/min -- Direct-acting directional spool valve operated by handle -- Optional with return spring or detent -- Plate connection -- There are 46, 19, 18...